To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When the back end feels like it’s rolling through corners, this 1" solid 4140 chromoly steel sway bar ties the rear axle to the chassis for a more balanced ride. The adjustable design has three stiffness settings, so you can fine-tune handling to match your setup. The result is tighter control and less body roll when you’re cornering or reacting to quick maneuvers.
Keeping the wheel steady through crosswinds or when semis blow by doesn’t have to be a workout. This rear anti-sway bar minimizes side-to-side movement, making the vehicle feel level and predictable mile after mile. It takes less effort to hold your line and cuts down on the constant steering corrections that wear you out on long hauls.
This isn’t a setup that softens over time. It uses polyurethane bushings that resist oil, gasoline, and ozone, so they stay firm and supportive far longer than rubber. The bar itself carries a silver vein hammer tone powder coat, and the brackets are finished in black powder coat to fend off corrosion and keep everything looking sharp down the road.
This is a true bolt-on kit that mounts to the rear axle and chassis without drilling. It includes zinc-plated hardware, lubricant for the bushings, and easy instructions. You can reuse your factory end links and get everything buttoned up with basic tools for a clean, secure fit that’s ready to drive.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. Let's take a look together at this Hellwig Adjustable Rear Anti-Sway Bar. Now this anti-sway bar is designed to fit your 2009 to 2014 Dodge Ram 1500, then your 2010 to 2018 Ram 1500, both two and four-wheel drives, and then your 2019 and newer Ram 1500, and then 1500 Classic two and four-wheel drives. On custom fit parts such as this anti-sway bar, I do recommend taking advantage of our vehicle fit guide here at etrailer.com. Insert the year, make and model of your vehicle and our Fit Guide will confirm if this will work for you or if we have something comparable that will work for you. This bar is designed to replace your factory installed sway bar, and it will reuse your factory supplied end links and some of your original hardware will be reused as well during the installation.
So you wanna make sure that you don't discard that original hardware until after the installation of this anti-sway bar. Now this bar is going to work in conjunction with your suspension system, attaching to the rear axle and to the chassis using the weight of the axle to brace the frame as it shifts and turns. And this bar is going to help minimize side-to-side movement, improving the overall stability of your vehicle. And the system will let you execute turns and quick maneuvers with confidence. It's also going to provide a level ride for you, even on your regular surfaces.
And then it's gonna help reduce driver fatigue by minimizing the effort required to keep your vehicle in line. It's also going to help diminish the effects of crosswinds, passing motorists, and shifting cargo. Now this anti-sway bar does for side-to-side movement what a good pair of shocks does for up-and-down motion, giving you a marked improvement in the overall stability of your vehicle. And as soon as you have this installed, you are going to feel the immediate benefits of having this in place. Now hopefully you can see on either side here we do have three adjustment holes that's going to allow you to choose the degree of stiffness that you're looking for.
The holes that are closest to the bar are going to be the stiffest setting, and then the holes that are farthest from the bar are gonna be the softest. So you have that range of adjustability. These bushings are made of polyurethane instead of the standard rubber variety, giving you a longer lasting system. They're durable and resistant to damage caused by oil, gasoline, and ozone. So less wear means less give in the system and better overall support.
This bar has a diameter of one inch. It is made here in the USA of solid heat-treated chromoly steel, giving you that superior strength. And I would like to zoom in overhead just to give you a view of this finish. This bar features a Hammertone Silver Vein finish that's not only gonna give you protection from corrosion, but the finish actually has little divots in it. So when you grease your polyurethane bushings and then slide them on the bar, this finish is gonna do a great job of holding that grease in the bushing to prevent them from squeaking. This does include instructions to guide you through the installation process, and zinc-plated mounting hardware, and also bushing lubricant. And this bar does have a limited lifetime warranty from Hellwig. Well, I think that's gonna wrap up our look today. I do hope that our time together was helpful for you. Again, my name is Andy, thank you for joining me.
Ratings & Reviews
Kate F.
6/5/2026
Thanks for your review, Matt! It says a lot that this is the third truck you've equipped with a Hellwig anti-sway bar. We're glad to hear you've continued to see improvements in handling, especially when cornering, towing, and dealing with crosswinds. It really is amazing the difference an upgraded sway bar makes!
Do you have a question about this Anti-Sway Bar?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Lazer S.
5/13/2026
Glad we could help, George! I'll let Don know as well! Have you noticed a difference in handling yet?